|
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is a non-hazardous, biobased hydraulic fluid engineered for Original Equipment Manufacturers (OEMs) and used in Military, Manufacturing, Construction, Forestry, Marine, and Agriculture industries.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is a 100% Ultimate3 Biodegradable hydraulic fluid made from U.S.D.A. sponsored High Oleic Base Stocks (HOBS)1 and processed with patented Stabilized2 chemistry for high performance and fluid longevity.
Bio MIL-PRF-32073 Hydraulic Fluids are high performance, high quality vegetable oil formulas engineered to replace mineral oil based hydraulic fluids for environmentally sensitive areas.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has been specifically formulated to provide additional Seal Swell (10% to 30%) as required by MIL-PRF-32073.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is formulated to perform in hydraulic systems that require Anti-Wear, Anti-Foam, Anti-Rust, Anti-Oxidation, and Demulsibility properties.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 allows governments, manufacturers, and companies to:
- Gain substantial performance enhancements in Hydraulic Power Systems
- Reduce overall impact and footprint on the environment
- Lower toxic exposures to workers
- Meet compliance with Green Purchasing regulations.
Safe, reliable, affordable, and available in all quantities today, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is setting new industry standards for:
- Performance
- Environmental Protection
- Worker Health & Safety
- Economic Sustainability
To purchase, simply call (650) 213 - 9979 or sign-up to open your Green Purchasing Account.
Drop In Replacement For Petroleum Fluids - ISO 32
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 meets and exceeds OEM's Requirements & Specifications, including:
- Very little wear was encountered (0 - 25mg = PASS) in accelerated biobased tests using industry standard Pump Stand Tests at pressures and temperatures ranging from 2000 to 3000 psi and 150 to 210 °F:
- Denison T-5D
- Vickers 20VQ
- Vickers 35VQ-25 (M-2950-S)
- V-104C (ASTM D-2882)
- Anti-Wear performance exceeds the Load Stage 10 in the FZG (DIN 51354) requirements for US Steel 136, DIN 51524, and GM (LS-2).
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 meets and exceeds Military Specifications for high quality fluids, Federal Specifications A-A-50354 superseding MIL-H-46001D.
Multi-Grade, Energy Conserving Hydraulic Fluids
The super high Viscosity Index (VI) of the Stabilized HOBS allows Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 to be Energy Conserving in pump startup mode while providing improved load protection to reduce wear during pump operation. The high Viscosity Index makes these products lighter and more Energy Efficient at room temperatures up to 40 °C. At high loads and operating temperatures above 60 °C, the Stabilized HOBS provides a heavier, more protective, full Fluid Film viscosity than mineral and synthetic based formulas.
Incorporating the super high viscosity index of the Stabilized High Oleic Base Stocks (HOBS) into the formula yields Multi-Grade synthetic base oil performance by boosting the viscosity index to synthetic levels. Multi-Grade performance allows one Bio Hydraulic Fluid to replace two or more ISO Grade products and Reduce Inventory.
Multi-Purpose Hydraulic Applications
- Proven field testing shows Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 provides the highest level of quality performance in a wide variety of Transportation and Stationary type equipment operating in broad ranges of environmental conditions.
- Multi-Purpose applications include Mobile and Stationary hydraulic Vane, Piston, and Gear-type Pumps.
- Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is compounded with a Zinc-free Ash-less additive system that meets or exceeds requirements for GL-3 Gear Oils in Reduction Units and Gear Sets.
- Recommended for use in Marine Environments.
Highly inhibited against moisture, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 prevents Rusting and Corrosion in both Fresh and Sea water applications passing both A & B sequences of the ASTM D-665 Turbine Oil Rust Test.
- Recommended for use in hydraulic systems where Low Toxicity, high Flash Point, and Biodegradability properties are required or desired.
Note: Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 can be tailor designed to gain efficiencies in specialized applications.
|
Recommended for Heavy Duty Hydraulic Systems:
|
- Aggregate
- Agricultural Products
- Air Compressors
- Articulated Trucks
- Backhoe Loaders
- Compactors
- Concrete Equipment
- Cranes
- Drills
- Dump Trucks
- Engines/Power Systems
- Excavators
- Forest Products
- Forklifts
- Integrated Toolcarriers
- Lifts
- Mining Equipment
- Motor Graders
- Off-highway Trucks/Tractors
|
- On-highway Trucks
- Paving Equipment
- Pipelayers
- Scrapers
- Skid Steer Loaders/ASV
- Shoring Equipment
- Sprayer
- Telehandlers
- Track Type Loaders / Crawlers
- Track Type Tractors / Dozers
- Trenching
- Underground Equipment
- Utility Vehicles
- Waste Incinerators
- Water Equipment
- Welders
- Wheel Dozers
- Wheel Loaders
- Work Tools
|
Advanced Equipment Protection
Engineered for today's advanced processing machines and equipment, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is designed to deliver a measurable Return On Investment by:
- Reducing machine Wear and Failure by:
- Reducing Friction & Fatigue
- Reducing Pitting & Micro-pitting
- Reducing Scoring, Scratching, Welding
- Reducing Corrosion & Rust
- Improving Heat Transfer
- Inhibiting Foam
- Inhibiting Gum, Sludge, Varnish
- Removing foreign or wear particles from critical contact areas
- Reducing machine Maintenance cycles
- Reducing overall system Down-time
Industrial machinery and equipment operating under high stress will benefit from improved Fluid Film Strength, Oxidation Stability, Shear Stability, Heat Stability, Hydrolytic Stability, Anti-Foam, Anti-Corrosion, Anti-Rust, and Anti-Wear Extreme Pressure properties. These properties minimize the rates of wear on hydraulic system Components, Seals, and Fluid in processing equipment and machines.
Collectively, these system wide performance improvements can lead to a positive Return On Investment in capital equipment as measured by:
- Longevity of Components and Parts
- Improved Machine Operability
- Extended Machine Service Life
- Improvements in Plant Safety
- Improvements in Productivity
- Consolidation of Fluid Inventories
Tribological Qualities, Properties, and Features
Proven Leader In Fluid Stability
Stability is what defines a premium quality hydraulic fluid. Stability is the most notable quality of United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 made from Stabilized2 HOBS1 and Bio Corrosion Inhibitor (BCI™) chemistries.
The overall stability of United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is a function of four main qualities: Oxidation Stability, Mechanical Shear Stability, Hydrolytic Stability, and Combustion Stability.
|
Made from Stabilized2 HOBS1, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 shows performance improvements over petroleum in nearly all physical properties:
Superior Lubricity
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is formulated to outperform petroleum based products. The natural Fluid Film of this high viscosity fluid has proven in laboratory and field tests to outperform petroleum fluids in terms of Lubricity.
Greater lubricity leads to:
- Less Wear
- Less Energy Consumption
- Lower Operating Temperatures
Oxidation Stability
Oxidation Stability is the most important quality affecting Operation and Service Life of Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32. The properties of any type of hydraulic fluid can be expected to change with time. Factors most influencing change include:
- Mechanical Stress and Cavitation, which can break down and reduced fluid Viscosity.
- Oxidation and Hydrolysis which cause:
- Chemical Changes
- Formation of Volatile Components
- Insoluble Materials
- Corrosive Products
Patented Stabilized2 High Oleic Base Stocks (HOBS)1 technology keeps Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 from breaking down and forming Acidic Residues harmful to rubber seals, gaskets, and other elastomers.
Bench tests measuring Oxidation Stability
indicate United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is superior in comparision with the leading petroleum based
Synthetic brands, non-stabilized Commercial Vegetable Oils (i.e. Rapeseed, Canola, Soy), and Mineral Oils in
terms of the longest PDSC time of 90 minutes and the lowest Acid Number < 0.4 in the industry.
Enhanced chemical stability prevents the formation of varnish deposits and thickening of gums and sludge.
Superior ASTM D6186, "Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)"
Superior Oxidation Stability is measured by ASTM D-6183 testing methods, yielding a PDSC time of 90 minutes!
PDSC testing validates patented Stabilized High Oleic Base Stocks (HOBS) technology naturally prevents oxidation from occurring in Bio Hydraulic Fluid formulas. Stabilized technology provides Bio Hydraulic Fluid formulas with an extremely high resistance to chemical breakdown, or Thermal Degradation.
Neutralization Number
ASTM D-974, "Standard Test Method for Acid and Base Number by Color-Indicator Titration" is another method used to measure Oxidation Stability.
Acid Neutralization Number measuring less than 0.4 for United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is one of the lowest in the industry!
Super High Viscosity Index
Natural Fluid Film Strength prevents viscosity breakdown under high-shear conditions.
The super high shear stable Viscosity Index = 184 of Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 made from
Stabilized High Oleic Base Stocks (HOBS) naturally provides very high Fluid Film strength yielding superior Lubricity,
Load Carrying Capacity, and Mechanical Shear characteristics for optimum protection of all critical gears,
bearings, and components.
The shear stable Viscosity Index allows pumps to be safely started at low ambient temperatures where the flow properties of conventional straight grade petroleum based hydraulic fluids often cause problems. The high Viscosity Index of Stabilized HOBS improves operating reliability over a wide range of pump output pressures.
The high Viscosity Index (i.e. VI = 184) reduces friction between moving parts resulting in less heat generated. Less Heat means Less Energy Consumption and Lower Risk of Leaks.
Conversely, at higher operating temperatures, the high Viscosity Index maintains the proper Viscosity required to minimize internal pump Leakage and Wear.
Note: High shear rates and turbulent flow conditions often present in hydraulic systems can quickly destroy the molecular bonds
of petroleum based hydraulic fluids (Mineral Oil, Synthetic, Synthetic Blends). Over time, this degradation results in loss of viscosity.
Extreme Temperature Protection
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 withstands high and low temperature variations and swings.
Cold Fluid Temperature Reliability
A very low Pour Point = -40 °C, -40 °F and improved low temperature fluidity
both contribute to improved Energy Efficiency.
Patented Stabilized technology incorporates advanced Cold Flow
properties to maintain fluidity for improved cold temperature Starting and Pumpability.
High Fluid Temperature Reliability
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is engineered for long term, High Temperature operation.
The higher Flash Point = 236 °C, 456.8 °F, superior Viscosity Index, and greater Oxidation Stability allow this fluid to function in very high
temperatures without breaking down and reducing viscosity.
Note: Petroleum-based hydraulic fluid temperatures above 180 °F will damage most seal compounds and accelerate degradation of fluid. When temperatures are too high, the fluid's viscosity drops below the required value and the hydraulic system's components begin to wear due to inadequate lubrication as a result of excessive thinning of the lubricating Fluid Film.
Patented Stabilized2 chemistry maintains Shear Stability, Oxidation Stability, and
Fluid Film thickness at extremely high temperatures and Fluidity and cold flow Pumpability at severely low temperatures.
Anti-Wear (AW) - Extreme Pressure (EP) Protection
The purpose of Anti-Wear additives is to maintain lubrication during conditions of Boundary Lubrication.
A Zinc-free additive package provides Anti-Wear (AW) - Extreme Pressure (EP) performance protects critical gears, bearings, and components
from Wear and Fatigue. System components remain protected from wear and fatigue while operating under
heavy loads in rugged service.
Very High Load Carrying Capacity
Anti-Wear (AW) and very high Load Carrying Capacity characteristics combine to reduce
Pitting and Scoring without hurting any of the soft Yellow metals often found in hydraulic pumps.
The combination of Lubricity, Anti-Oxidation, and Load Carrying Capacity protects metal pump bearings,
gears, and other components from Scuffing, Galling, Scoring, Scratching, Pitting, and Fatigue.
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 meets and exceeds major Original Equipment manufacturers (OEMs) hydraulic pump Anti-Wear protection requirements. Anti-Wear (AW) additives have been
thoroughly Tested and Qualified against the most stringent and demanding Military and Industrial hydraulic fluid standards.
Extensive 3rd Party, independent laboratory testing shows and validates United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32,
made from Stabilized HOBS, truly outperforms conventional petroleum hydraulic fluids in Accelerated 4-Ball EP Wear Tests
measuring Load Carrying Capacity.
Natural Lubricity and Load Carrying Capacity combine to keep machinery and equipment
in top working condition while operating under heavy loads, extreme temperatures, and high pressures.
Resistance Against Foaming
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 resists foaming and Air Entrainment through the use of Anti-Foam agents. Anti-Foam agents are surface-active chemicals designed to prevent foam by lowering the surface tension of air bubbles. This change in surface tension causes air bubbles to either collapse or rupture.
Anti-Foaming and Air Release properties make Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 highly resistant to Foaming, Aeration and Cavitation; thereby eliminating Sponginess and Fading hydraulic system responses.
Anti-Foaming additives prevent Reservoir Overflow, Overheating, and Contact between adjacent metal surfaces.
In addition to preventing Foaming, Aeration and Cavitation, United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 prevents many other common problems due to Foaming:
- Increased machine operating temperatures
- Inadequate lubrication due to reduced fluid flow
- Loss of Fluid Film between mating surfaces
- Increased Oxidation of fluid
- Increased gear and bearing noise
- Erratic operation
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 passes the ASTM D 892, "Foaming Characteristics of Lubricating Fluids" test method with Zero Foam.
Note: Abnormal noise in hydraulic systems is often caused by Aeration or Cavitation.
Bio Corrosion Inhibitors (BCI™)
Patented Bio Corrosion Inhibitors (BCI™) effectively inhibit both the corrosion of Yellow metals and rusting of Ferrous metals.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 with BCI™ chemistry prevents corrosion and rust from occurring on the surface of metals in both Fresh Water and Salt Water environments.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 with BCI™ chemistry meets and exceeds U.S. Military Anti-Rust and Anti-Oxidation requirements for hydraulic systems used in all types of military, industrial, and farming machinery and equipment.
Anti-Corrosion and Anti-Rust protection reduces formation of deposits on the surface of metal parts and components.
No other competitive lubricant company has this advanced BCI™ technology offering.
Anti-Rust Protection
Rust is a chemical reaction between water and ferrous metals.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 prevents rusting in both Fresh & Salt water environments. This is demonstrated by passing results in both A & B sequences of the ASTM D 665, "Turbine Oil Rust Test".
Anti-Corrosion Protection
Corrosion is a chemical reaction between chemicals, usually acids, and yellow metals. There are many types of industrial hydraulic systems that have parts made of Non-Ferrous, or Yellow metals, i.e. Copper, Brass or Bronze.
BCI™ chemistry prevents acids and other corrosive agents from reacting with the metal surfaces of non-ferrous Yellow metals.
BCI™ is not chemically reactive to Yellow metals as demonstrated by the ASTM D 130, "Copper Strip Corrosion Test".
Water Resistant
Superior Hydrolytic Stability
Highly resistant to moisture, United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 with Bio Corrosion Inhibitors (BCI™) exhibits
excellent Hydrolytic Stability in the presence of water.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has the ability to Emulsify water and Suspend and Disperse other
contaminants, i.e. Gum, Varnish, and Sludge, thereby preventing the formation of Deposits on metal surfaces. Components remain free from
harmful, deteriorating deposits.
To boost Hydrolytic Stability, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 with BCI™ chemistry
is compounded with Demulsifiers, Detergents, and Dispersants. Demulsibility properties
readily separate out water from the fluid. Collectively, these safe additive agents act to inhibit the formation of Rust and Corrosion
while enhancing fluid Filterability.
Superior Hydrolytic Stability prevents damage to Pumps, Hydraulic Valves, Actuators,
and the Circulating System operating in humid or wet climates.
Note: Water contamination of hydraulic fluids accelerates the aging of the fluid, reduces
Lubricity, Filterability, and Seal Life, and leads to Corrosion and Cavitation. At high temperatures,
emulsified water can be turned into 'Steam' at the contact points of highly loaded parts in the system.
Seal Conditioning
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is formulated to provide Seal Conditioning for Longer Seal Life and to Reduce Fluid Leakage from the system.
Combustion Stability
Extremely Low Volatility
The extremely Low Volatility of Stabilized HOBS increases the Flash Point and Fire Point safety features of Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32.
Low Volatility prevents surface molecules from vaporizing into exhaust air. Noticeably, there is no Off-Gassing of harmful toxic vapors when working near or handling these safe, biodegradable fluids.
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 do not contain and will not Off-Gas any harmful fumes, including Volatile Organic Compounds (VOCs), Phenols, or Chlorides.
Extremely low Volatility leads to:
- Lower Evaporation rates
- Less Make-up fluid
- No Off-Gassing of harmful vapors and fumes
- Higher Flash Point = 236 °C, 456.8 °F
|
System Convertion and Fluid Installation
Conversion procedures are much easier with Bio Hydraulic Fluids. No engineering design changes are necessary.
To convert a system, simply drain and recharge.
For proper biodegradability, at least 90% of the mineral oil based fluid should be removed from the system. Most of the fluid can be removed by draining the reservoir and lines.
Flushing
Flushing is not necessary for compatibility, but if you choose to flush, only use Bio fluids as a flushing fluid.
Top Filling
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 may also be used as a top fill (with compatible fluids) until the existing fluid is converted in the maintenance schedule.
Fluid Change Over Procedure
There are 3 basic steps to installing Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 in any hydraulic system:
- Drain existing fluid from reservoir and total system such as Pumps, Lines and Hoses.
- Change out filters, if neccesary.
- Refill system with Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32.
It's that simple.
Extended Drain Intervals
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 yields extended oil drains based on oil analysis. The ability of Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 to extend drain intervals and excel in performance is subject to operating conditions and maintenance practices.
Note: It is recommended systems be drained prior to installing Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32.
Small amounts of contamination (lines, residue) with existing petroleum fluids being replaced are acceptable. Excessive fluid contamination with petroleum based fluids will minimize this products Quality, Performance, and Biodegradability effectiveness.
Compatibility with Existing Fluids and Materials
Compatible with Seals, Elastomers, and Coatings
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is compatible with hydraulic system materials and components designed to operate on mineral oil based and most synthetic based hydraulic fluids.
In addition, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has been tested and have shown to be compatible with mineral oil based and most synthetic based fluids.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is compatible with the same filters, seals, hoses, and accumulator bladders.
One of the most widely used elastomers in the industry for mineral oil based hydraulic systems is Buna-N Low Nitrile Rubber (NBR-L). United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is fully compatible with Buna-N Low Nitrile Rubber and other commonly used Elastomers.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 can operate in Static, Mid-Dynamic, and Dynamic areas of hydraulic systems that contain the following materials:
|
ISO 1629
|
Description (Trade Names)
|
|
NBR
|
- Medium to High Nitrile Rubber (Buna N, > 30% Acrylonitrile)
|
|
NBR-L
|
- Low Nitrile Rubber (Buna N, < 30% Acrylonitrile)
|
|
FPM
|
- Fluoroelastomer (Viton)
|
|
AU
|
- Polyurethane (Adiprene, Millathane)
|
|
PTFE
|
- Polytetrafluoroethylene (Teflon)
|
|
CR
|
- Polychloroprene (Neoprene)
|
Compatible with Mineral Oil based Hydraulic Fluids
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has been tested and have shown to be compatible with Mineral Oil based and most Synthetic based fluids.
Compatible with Synthetic Polyalphaolefin based Hydraulic Fluids
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has been designed to directly replace synthetic Polyalphaolefins (PAOs) and Semi-Synthetic PAO and mineral oil blends.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is fully compatible with synthetic Polyalphaolefins (PAOs) and Semi-Synthetic PAO and mineral oil blends. These are the most widely used synthetic lubricants in the world lubricant market and generally are formulated to meet the same hydraulic systems compatibility requirements as mineral oil based fluids.
Compatible with Synthetic Ester based Hydraulic Fluids
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is highly compatible with systems designed to use Synthetic Esters.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is compatible with most synthetic esters based fluids and depending on selection of esters they may be considered biodegradable.
Compatible with Phosphate Ester based Hydraulic Fluids
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is compatible with some, but not all Phosphate Ester fluids.
Testing is recommended before conversion. Seal compatibility should also be considered because Butyl rubber is the most compatible elastomer with phosphate esters. Butyl rubber has poor compatibility with mineral oils
Made From Renewable Resources
 United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is formulated from U.S.D.A. sponsored High Oleic Base Stock (HOBS)1 and processed with stabilized technology for high performance, longevity, Anti-Oxidation, Anti-Wear, Cold Flow Technology, reduced fluid thickening, and lower deposits.
Stabilized HOBS is compounded with an environmentally friendly Zinc-free additive system that meets API Service Classifications GL-3 for an Ashless type gear lubricants.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is formulated to outperform petroleum based hydraulic fluids. The natural fluid film of this high viscosity product has proven in laboratory and field tests to outperform petroleum based hydraulic fluids in terms of natural Lubricity.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is setting new industry standards for performance, worker health & safety, and environmental protection.
Industrial companies can help ensure worker health safety and begin lowering their environmental impact through the use of Bio Hydraulic Fluids in all types of hydraulic applications throughout their sites and facilities.
Safe, Non-Hazardous, and Environmentally Friendly
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has an additional benefit of being non-toxic to humans. Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is recommended when maintenance of a hygienic atmosphere in manufacturers processing plants is a critical concern. Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is safe for use in all types of equipment and machinery used in manufacturing and other industries.
Safe from contaminants, grown from renewable agricultural resources, High Oleic Base Stocks are naturally ultra-high purity base fluids. In contrast, most competitive mineral oils are manufactured by refining, a solvent-based process that retains contaminants from a crude-oil source. Refinery generated contaminants can lead to acid development and premature aging of fluid.
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is safe for employees and safe for the environment. Bio Hydraulic Fluid - ISO 32 is formulated with non-hazardous, non-toxic additives to help prevent contamination of workers.
Listed in the USDA's BioPreferred program, Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is preferred over petroleum hydraulic fluids when there is incidental contact with the fluid, or when direct exposure to the environment is likely.
Advanced Safety Features
- Compliments Hazard Analysis and Critical Control Point (HACCP).
- Compliments Good Manufacturing Practice (GMP) protocols.
- U.S.D.A. certified Ultimately Biodegradable.
- O.S.H.A. certified Worker-friendly.
- Approved by Navy Medical as non-toxic.
- Fire resistant - High Flash Point.
- Extremely Low Volatility - No off-gassing of harmful Fumes.
UBL's Quadruple Bottom Line
1. High Performance
| |
|
Meets and exceeds Military Specifications for high quality fluids, Federal Specifications A-A-50354 superseding MIL-H-46001D
|
|
| |
|
Seal Swell FTM- 791-3603 NBR-L = 13%
|
| |
|
Highest Oxidation Stability in the industry! PDSC = 90 minutes.
Patented Stabilized2 chemistry prevents oxidation from occurring.
|
| |
|
Super High Viscosity Index = 184 (ASTM D-2270)
Viscosity @ 100 °C = 6.9 (ASTM D-445)
Viscosity @ 40 °C = 30.87 (ASTM D-445)
Viscosity @ -15 °C = 550 (ASTM D-445)
|
| |
|
Extreme Pressure (EP) Anti-Wear additives.
|
| |
|
Excellent Hydrolytic Stability (ASTM D-2619).
Water Resistant. Rapidly separates from water.
Passes ASTM D-1401 Demulsification Test. Demulsifies water for improved lubricity in humid conditions.
Demulsibility properties prevent formations of emulsions (i.e. Gum, Varnish, and Sludge).
|
| |
|
Bio Corrosion Inhibitors prevent rusting and decay.
Meets ASTM D-665 Salt Water Rust Prevention Test.
Meets ASTM D-130 Copper Corrosion Test.
Protects metal integrity.
|
| |
|
Zero Foam in Foam Sequence Tests (I, II, III).
Prevents damage caused by insufficient lubricant film due to Aeration, or Air Entrapment.
|
| |
|
Chemically compatible with all types of seals and coatings.
Non-corrosive. Will not deteriorate Yellow metals.
No acidic residues to bind moving parts.
No gum or varnish deposits.
|
| |
|
Long lasting service life.
|
| |
|
High Temperature Operation.
Fire resistant. The extremely low volatility of HOBS increases this product's flash point and fire safety features.
High Flash Points prevent smoking and ignition.
Meets ASTM D-92 Flash Point = 236 °C, 456.8 °F
|
| |
|
Low Temperature Operation.
Meets ASTM D-97 Pour Point = -40 °C, -40 °F
Advanced Cold Flow Technology
|
| |
|
Advanced Energy Conserving formula.
|
2. Health & Occupational Safety
| |
|
High Oleic Base Stocks, HOBS are the purest Base Oils in the marketplace providing the highest level of hygienic protection against contamination; such safety standards are inherently unattainable in pure synthetic lubricants and mineral oils.
|
| |
|
Compliments Hazard Analysis & Critical Control Point (HACCP) systems.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 does not contain any chemical listed as a carcinogen or potential carcinogen by OSHA, IARC Monographs or National Toxicology Program.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has no known hazards. This product is considered Non Hazardous when handled properly and used for intended purpose.
|
| |
|
The extremely Low Volatility of HOBS increases this product's flash point and fire safety features. Flash Point = 236 °C, 456.8 °F.
|
| |
|
No off-gassing of harmful volatile vapors.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 contains no solvents or waxes.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is Safe, Non-Hazardous, and O.S.H.A. certified Worker Friendly.
|
|
NFPA CODE: HEALTH: 1 FIRE: 1 REACTIVITY: 0
HMIS CODE: HEALTH: 1 FIRE: 1 REACTIVITY: 0
|
3. Environmental Compliance & Protection
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is preferred over petroleum fluids in applications where there is a direct danger of polluting the air, water, soil, or work environment through loss of the lubricant.
|
| |
|
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 has the highest U.S.D.A. rating of Ultimate Biodegradable.
|
| |
|
Meets and exceeds the Acute Toxicity (LC-50) criteria adopted by the U.S. Fish & Wildlife Service and the U.S. EPA requirements 560/6-82-002, 560/6-82-003.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 is an Environmentally Responsible fluid formulated from Renewable agricultural plant resources.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 contains No Lead or other Heavy Metals: No Zinc, No Antimony, No Barium.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 contains No Chlorine, or Phenols.
|
| |
|
Fully Recyclable, Re-refinable, and Sustainable.
|
| |
|
Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32 eliminates storage and disposal of hazardous waste.
|
4. Return On Investment - ROI
|
United Bio Lube's Bio MIL-PRF-32073 Hydraulic Fluid (Grade 3) - ISO 32:
|
| |
|
Yields a return on capital investment through system-wide improvements.
|
| |
|
Longer Service Life than conventional hydraulic fluids.
|
|
| |
|
Improves equipment performance.
|
| |
|
Less money spent on repairs, replacement parts, and costly down-time.
|
| |
|
Enables compliance with environmental regulations.
|
| |
|
Reduces toxic exposures to workers.
|
| |
|
Reduces hazardous materials handling and storage costs.
|
| |
|
Reduces hazardous waste by natural recycling.
|
| |
|
Reduces petroleum hydrocarbon contamination in landfills.
|
| |
|
Preserves ground water and soil.
|
| |
|
Reduces petroleum consumption.
|
| |
|
Promotes an alternative lubrication resource.
|
| |
|
Helps accomplish Pollution Prevention (P2) objectives.
|
| |
|
Helps begin to secure national energy needs.
|
| |
|
Promotes a renewable U.S. Bio Economy.
|
1Ultimate Biodegradation (Pw1) within 28 days in ASTM D-5864 Aerobic Aquatic Biodegradation of Lubricants.
2 High Oleic Base Stocks (HOBS) are specialized Soy, Corn, Sunflower, and Canola vegetable oils containing high levels of Oleic Acid. HOBS are renewable lubricants engineered to replace petroleum basestocks. Economically sustainable, HOBS is America's solution to petroleum based oils. Moreover, HOBS supports U.S. Farmers, protects workers and their environment, and reduces dependancy on foriegn oil.
3Stabilized is Renewable Lubricants Inc.'s trademarked, proprietary, and patented Anti-Oxidant, Anti-Wear, and Cold Flow Technology. Stabilized technology enables HOBS to perform as a high performance formula in high and low temperature applications, reducing oil thickening and deposits.
|
About
Lubricant Solutions
